 ModUcom introduces the New Micro-Cam to work with Remote Position
The new Micro-CAM by Moducom will work with any remote position computer including the ELO 1529L Touchcomputer. The 1529L is a nice self-contained package which makes it attractive for a small-footprint a Remote Position.
A Software Remote Operator Position provides almost all of the functionality of a conventional Ultra-Com operator position without requiring a CAM box and a dedicated T1 connection to the MEP. In this configuration, a standard Windows PC running the Ultra-Com Run Mode Operator Position software connects to a local (or remote) MEP via an IP network. There is no CAM connected to the PC. The Operator Position software routes the position's Select and Unselect audio to standard multimedia speakers connected to the PC. The operator uses a microphone connected to the PC sound card for transmit audio. The operator interacts with the Operator Screens using a mouse, optional touch screen and the keyboard. While this configuration is less costly than a full CAM-based operator position and can be located anywhere there is access to the Moducom IP network, it does have several limitations. The most serious limitations are the lack of a standard desk microphone, headset jack and footswitch connections. The Micro-CAM is a low cost USB accessory that restores the use of these peripherals when using a Software Remote operator position.
Remember, the Micro-CAM's only real purpose is to support and improve the functionality of a Software Remote Position. It is really an accessory to a Software Remote Position which is the real product.
These are the rankings of the four main benefits of the Micro-CAM and a remote position.
- Allows the use of standard headsets, handsets, desk microphone and footswitch on a Software Remote Position.
- Lower cost.
- Flexible deployment.
- Small footprint.
|
